Table of Contents
Advertisement
4.1 Device Information
View the device information, including the version, model, serial No. and open source disclaimer.
Steps
1. Select Settings →
2. View the device version, module, and serial No.
3. Optional: Select Open Source Disclaimer to view the OSS statement.
4.2 General Settings
You can set time and date, system language and adjust the screen brightness on this page.
Select Settings →
Time and Date
Set the displayed time and date format, current time. Enable Synchronize Time to Door Station
to synchronize the device time to the linked door station.
System Language
Select System Language to change the system language.
Brightness Adjustment
Select + or - to adjust the screen brightness.
Clean Screen
Enable Clear Screen and the screen will be locked for 30s. And you can clear the screen within
the time duration.
Note
After enabling Clear Screen function, press and hold the Unlock key to exit the clear screen
●
mode.
The device without unlock key will exit the clear screen mode automatically when the time is
●
out.
4.3 Preference
You can configure shortcut settings on the preference page.
Select Settings →
Shortcut Settings
Network Indoor Station User Manual
Chapter 4 Local Configuration
→ Device Information to enter the Device Information page.
to enter the general settings page.
to enter the preference page.
6
Advertisement
Table of Contents
