Table of Contents
Advertisement
DS-KD8003 Series Module Door Station User Manual
5.1 Activate via Web Browser
You can activate the device via the web browser.
Steps
1. Enter the device default IP address (192.0.0.65) in the address bar of the web browser, and press
Enter.
Note
Make sure the device IP address and the computer's should be in the same IP segment.
2. Create a new password (admin password) and confirm the password.
Caution
The password should be 8 to 16 characters.
●
The password should contain at least 2 of the following types: digits, lowercase letters,
●
uppercase letters and special characters.
Do not contain following characters in the password: the user name, 123, admin (case-
●
insensitive), 4 or more continuously increasing or decreasing digits, or 4 or more consecutively
repeated characters.
The password strength of the device can be automatically checked. In order to increase the
●
security of your product, we highly recommend you change the password of your own
choosing. And we recommend you change your password regularly, especially in the high
security system, changing the password monthly or weekly can better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
service provider and/or end-user.
(If the device supports AP mode, after the admin password is changed, the password of AP
●
hotspot will be changed simultaneously.)
3. Click Activate.
4. Edit the device IP address. You can edit the IP address via the SADP tool, the device, and the
client software.
Chapter 5 Activation
72
Advertisement
Table of Contents
