Table of Contents
Advertisement
1 Local Operation
1.1 Activate Indoor Station
You can only configure and operate the indoor station after creating a password for
the device activation.
Steps
1. Power on the device. It will enter the activation page automatically.
2. Create a password and confirm it.
3. Tap OK to activate the indoor station.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 characters, including at least three kinds of following
categories: upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product. And we
recommend you change your password regularly, especially in the high security
system, changing the password monthly or weekly can better protect your
product.
1.2 Configuration Settings
Network Indoor Station Configuration Guide
Figure 1-1 Activation Page
1
Advertisement
Table of Contents
