HIKVISION DS-KD8003 Series User Manual page 83

DS-KD8003 Series Module Door Station User Manual
Figure 6-2 Add User
Add Basic Information
Add the person's basic information, including Employee ID, Name, Floor No. and Room No. . You
also need to select the User Role.
Click OK to save the settings.
Set Permission Time
Set Start Time and End Time and the person can only have the permission within the configured
time period. If you enable Always Valid, then the user can have the permanent permission and you
do not need to set Start Time and End Time.
Click OK to save the settings.
Note
You can check Administrator to set the user as the Administrator.
Add Card
Click Add Card, enter the Card No. or click Read to read card No. from the card reader module.
Select Property, and click OK to add the card.
Click OK to save the settings.
75