Intercom Settings - HIKVISION DS-KD8003 Series User Manual

DS-KD8003 Series Module Door Station User Manual
After enable the DESFire card content reading function, the device can read the DESFire card
No.

6.5.17 Intercom Settings

Device No. Configuration
Set the No. of the device, and linked devices can build a communication.
Steps
1. Click Intercom → Device No. to enter the settings page.
2. Select the device type from the drop-down list, and set the corresponding information.
3. Click Save to enable the device number configuration.
Note
For main door station (D series or V series), the serial No. is 0.
●
For sub door station (D series or V series), the serial No. cannot be 0. Serial No. ranges from 1
●
to 99.
For each villa or building, at least one main door station (D series or V series) should be
●
configured, and one sub door stations (D series or V series) can be customized.
For one main door station (D series or V series), up to 16 sub door stations can be configured.
●
Figure 6-18 Device No. Settings
97