HIKVISION KD3 Series Quick Start Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Intercom System
  5. KD3 Series
  6. Quick start manual

HIKVISION KD3 Series Quick Start Manual

Video intercom door station
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Video Intercom Door Station
(D Series)
Quick Start Guide

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION KD3 Series

Summary of Contents for HIKVISION KD3 Series

  • Page 1 Video Intercom Door Station (D Series) Quick Start Guide...
  • Page 2 Trademarks and other Hikvision marks are the property of Hikvision and are registered trademarks or the subject of applications for the same by Hikvision and/or its affiliates. Other trademarks mentioned in this manual are the properties of their respective owners. No right of license is given to use such trademarks without express permission.
  • Page 3 CONTAINED HEREIN. YOUR USE OF THIS MANUAL AND ANY RELIANCE ON THIS MANUAL SHALL BE WHOLLY AT YOUR OWN RISK AND RESPONSIBILITY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,...
  • Page 4 Video Intercom Door Station·Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 5 Video Intercom Door Station·Quick Start Guide 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).
  • Page 6 Video Intercom Door Station·Quick Start Guide Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Warnings and Cautions: Warnings: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage.
  • Page 7 Video Intercom Door Station·Quick Start Guide Model Manufacturer Standard DSA-12PFG-12 FUK 120100 Dee Van Electronics Co., Ltd. DSA-12PFG-12 FAU 120100 Dee Van Electronics Co., Ltd. Cautions  Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation.

  • Page 8: Table Of Contents

    Video Intercom Door Station·Quick Start Guide Table of Contents 1 Appearance ....................1 1.1 Appearance of DS-KD8102-V ................... 1 1.2 Appearance of DS-KD8002-VM ................2 1.3 Appearance of DS-KD3002-VM ................3 2 Terminal and Wiring ..................5 2.1 Terminal Description ....................5 2.1.1 Terminals and Interfaces of DS-KD8102-V/ DS-KD8002-VM ......

  • Page 9: Appearance

    Video Intercom Door Station·Quick Start Guide 1 Appearance 1.1 Appearance of DS-KD8102-V Figure 1-1 Front View Figure 1-2 Side View Table 1-1 Descriptions of Keys Description Low Illumination Supplement Light Built-in Camera LCD Display Screen Keypad Call Button Call Center Key Microphone Card Induction Area...

  • Page 10: Appearance Of Ds-Kd8002-Vm

    Video Intercom Door Station·Quick Start Guide IR Emission IR Receiver Loudspeaker TAMPER 1.2 Appearance of DS-KD8002-VM Figure 1-3 Front View Figure 1-4 Side View Table 1-2 Descriptions of Keys Description Low Illumination Supplement Light Built-in Camera LCD Display Screen Card Induction Area Loudspeaker Keypad...

  • Page 11: Appearance Of Ds-Kd3002-Vm

    Video Intercom Door Station·Quick Start Guide Call Button Microphone Call Center Key TAMPER 1.3 Appearance of DS-KD3002-VM Figure 1-5 Front View Figure 1-6 Rear View Table 1-3 Descriptions Keys Description Low Illumination Supplement Light Built-in Camera Loudspeaker...
  • Page 12 Video Intercom Door Station·Quick Start Guide Description LCD Display Screen Card Induction Area Keypad Call Button Call Center Key Microphone TAMPER...

  • Page 13: Terminal And Wiring

    Video Intercom Door Station·Quick Start Guide 2 Terminal and Wiring 2.1 Terminal Description 2.1.1 Terminals and Interfaces of DS-KD8102-V/ DS-KD8002-VM Figure 2-1 Terminals and Interfaces of DS-KD8102-V/DS-KD8002-VM Table 2-1 Descriptions of Terminals and Interfaces Name Interface Description USB Interface LAN1 Network Interface LAN2 Analog Interface...
  • Page 14 Video Intercom Door Station·Quick Start Guide Name Interface Description Card Reader Buzzer Output Card Reader Indicator Output (Invalid Card Output) Card Reader Indicator Output (Valid Card Output) TAMP Tamper-proof Input of Wiegand Card Reader AO2- Alarm Relay Output 2 AO2+ ALARM AO1- Alarm Relay Output 1...

  • Page 15: Terminals And Interfaces Of Ds-Kd3002-Vm

    Video Intercom Door Station·Quick Start Guide 2.1.2 Terminals and Interfaces of DS-KD3002-VM Figure 2-2 Terminals and Interfaces of DS-KD3002-VM Table 2-2 Descriptions of Terminals and Interfaces Name Interface Description USB Interface LAN1 Network Interface LAN2 Analog Interface Power DC 12V DC 12V Power Supply Input Supply Power Supply Output...
  • Page 16 Video Intercom Door Station·Quick Start Guide Name Interface Description AO2+ AO1- Alarm Relay Output 1 AO1+ Grounding Serial Port Debugging/Receive data DEBUG Serial Port Debugging/Send data 3.3V Serial Port Debugging/Power Supply Power Supply Output Grounding Door Lock Relay Output (NC) COM2 Grounding Signal DOOR...

  • Page 17: Wiring Description

    Video Intercom Door Station·Quick Start Guide 2.2 Wiring Description 2.2.1 Door Lock Wiring Figure 2-3 Door Lock Wiring  Terminal NC1/COM1 is set as default for accessing magnetic lock/electric bolt; terminal NO1/COM1 is set as default for accessing electric strike. ...
  • Page 18 Video Intercom Door Station·Quick Start Guide Figure 2-4 Door Magnetic Wiring for DS-KD8102-V/DS-KD8002-VM (1) To connect the door magnetic, it is required to set the output of terminal AI2 to be door magnetic with Batch Configuration Tool or iVMS-4200. Figure 2-5 Door Magnetic Wiring for DS-KD8102-V/DS-KD8002-VM (2) Terminal S2 is set as default for connecting door magnetic.

  • Page 19: Exit Button Wiring

    Video Intercom Door Station·Quick Start Guide Door Magnetic Wiring for DS-KD3002-VM Figure 2-6 Door Magnetic Wiring for DS-KD3002-VM To connect the door magnetic, it is required to set the output of terminal AI2 to be door magnetic with Batch Configuration Tool or iVMS-4200. 2.2.3 Exit Button Wiring Exit Button Wiring for DS-KD8102-V/DS-KD8002-VM For DS-KD8102-V/DS-KD8002-VM, there are two optional ways of exit button wiring.

  • Page 20: External Card Reader Wiring

    Video Intercom Door Station·Quick Start Guide Figure 2-8 Exit Button Wiring for DS-KD8102-V/DS-KD8002-VM (2) Exit Button Wiring for DS-KD3002-VM Figure 2-9 Exit Button Wiring for DS-KD3002-VM Terminal S1 is set as default for connecting exit button. 2.2.4 External Card Reader Wiring ...
  • Page 21 Video Intercom Door Station·Quick Start Guide  If the DIP switch should be configured when the card reader is power-on, please reboot the card reader after configuring the DIP switch.  The DIP switch description is shown in the following table: Description How to Configure ON: 1...

  • Page 22: External Elevator Controller Wiring

    Video Intercom Door Station·Quick Start Guide Wiegand Card Reader Wiring Figure 2-11 External Card Reader Wiring 2.2.5 External Elevator Controller Wiring You can connect the door station to the elevator controller via RS-485 interface. There are 4 groups of RS-485 interfaces on the elevator controller: group A, group B, Group C, and Group D.

  • Page 23: Alarm Device Input Wiring

    Video Intercom Door Station·Quick Start Guide 2.2.6 Alarm Device Input Wiring Alarm Device Input Wiring for DS-KD8102-V/DS-KD8002-VM Figure 2-13 Alarm Device Input Wiring for DS-KD8102-V/DS-KD8002-VM Alarm Device Input Wiring for DS-KD3002-VM Figure 2-14 Alarm Device Input Wiring for DS-KD3002-VM...

  • Page 24: Alarm Device Output Wiring

    Video Intercom Door Station·Quick Start Guide 2.2.7 Alarm Device Output Wiring Alarm Device Output Wiring for DS-KD8102-V Figure 2-15 Alarm Device Output Wiring for DS-KD8102-V/DS-KD8002-VM Alarm Device Output Wiring for DS-KD3002-VM Figure 2-16 Alarm Device Output Wiring for DS-KD3002-VM...

  • Page 25: Installation

    Video Intercom Door Station·Quick Start Guide 3 Installation Before you start:  Make sure the device in the package is in good condition and all the assembly parts are included.  The power supply the door station supports is 12 VDC. Please make sure your power supply matches your door station.

  • Page 26: Wall Mounting With Gang Box Of Ds-Kd8102-V

    Video Intercom Door Station·Quick Start Guide  The dimension of gang box for model DS-KD8102-V door station is: 404 (length)×123 (width)×47.5 (depth) mm.  The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension. 3.1.2 Wall Mounting with Gang Box of DS-KD8102-V Steps: 1.
  • Page 27 Video Intercom Door Station·Quick Start Guide Figure 3-4 Install the Door Station 5. Pull the door station downward and then push it towards the inside to make sure it fits the hole. 6. Tighten the screws of the door station with the Allen wrench. Figure 3-5 Tighten the Screws of Device...

  • Page 28: Installation Of Ds-Kd8002-Vm

    Video Intercom Door Station·Quick Start Guide 3.2 Installation of DS-KD8002-VM 3.2.3 Gang Box for DS-KD8002-VM 407.5 Figure 3-6 Front View Figure 3-7 Overhead (Plan) View  The dimension of gang box for model DS-KD8002-VM door station is: 407.5 mm × 135 mm ×...
  • Page 29 Video Intercom Door Station·Quick Start Guide Figure 3-8 Dimensions of the Hole 2. Insert the gang box into the hole and fix it with 4 PA4 screws. Figure 3-9 Insert the Gang Box into the Wall 3. Make sure the edges of the gang box align to the wall and the hook A and hook B of the gang box hook onto the wall.
  • Page 30 Video Intercom Door Station·Quick Start Guide Figure 3-10 Install the Door Station 7. After fixing the door station onto the gang box, secure it by inserting the plate and insert 2 POM2 screws. Figure 3-11 Secure the Door Station...

  • Page 31: Installation Of Ds-Kd3002-Vm

    Video Intercom Door Station·Quick Start Guide 3.3 Installation of DS-KD3002-VM 3.3.1 Gang Box for DS-KD3002-VM Figure 3-12 Front and Side View  The dimension of gang box for model DS-KD3002-VM door station is: 343(length)× 113(width)×55(depth) mm.  The dimensions above are for reference only. The actual size can be slightly different from the theoretical dimension.
  • Page 32 Video Intercom Door Station·Quick Start Guide Screw Screw Figure 3-13 Insert the Gang Box into the Wall 3. Make sure the edges of the gang box align to the wall. 4. Route the cables of the door station through the cable hole. 5.
  • Page 33 Video Intercom Door Station·Quick Start Guide Figure 3-15 Tighten the Screws of Device...

  • Page 34: Local Operation

    Video Intercom Door Station·Quick Start Guide 4 Local Operation 4.1 Keys Description Key descriptions of door stations are illustrated in Table 4-1. Table 4-1 Key Descriptions Description Numeric Key 2 ▲ Numeric Key 4 ▼ Numeric Key 6 ◄ Numeric Key 8 ►...
  • Page 35 Video Intercom Door Station·Quick Start Guide Figure 4-2 Set Password 3. Enter a new password, and confirm the password. The character description for each numeric key is shown in Table 4-2. Table 4-2 Character Description Description Description 1,.?!*#- 6mnoMNO 2abcABC 7pqrsPQRS 3defDEF 8tuvTUV...

  • Page 36: Edit Network Parameters

    Video Intercom Door Station·Quick Start Guide 4.3 Edit Network Parameters Purpose: Network connection is mandatory for the use of door station. Steps: 5. Go to the configuration mode. 1) Hold down the * key and the # key for 2s to enter the admin password page. 2) Enter the admin password, and press the # key.

  • Page 37: Change Password

    Video Intercom Door Station·Quick Start Guide Figure 4-5 Network Parameters Settings Page (private SIP) With the standard SIP protocol, you should set IP address, sub mask, gateway, and center IP. Figure 4-6 Network Parameters Settings Page (standard SIP) 7. Edit network parameters. 1) Move the cursor to parameters to be configured.
  • Page 38 Video Intercom Door Station·Quick Start Guide The default configuration password is 888999. We recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. Steps: 1. Go to the configuration mode. 1) Hold down the * key and the # key for 2s to enter the admin password page.

  • Page 39: Call Settings

    Video Intercom Door Station·Quick Start Guide Figure 4-9 Configuration Password Changing Page 2. Enter the old password, and the new password, and confirm the new one. 1) Move the cursor to parameters to be configured. 2) Press the # key to enter or exit the editing mode. 3.

  • Page 40: Call Contact

    Video Intercom Door Station·Quick Start Guide The door station can work as main/sub door station, and outer door station, which correspond to different calling resident modes respectively. Work as Main/Sub Door Station Steps: 1. Enter the calling No. With the private SIP protocol, the calling No. should be the room No. of the indoor station.

  • Page 41: Unlock Door

    Video Intercom Door Station·Quick Start Guide 2. Press the numeric keys 7 and 9 to turn the page. 3. Enter the No. and press the # key to call. 4.6 Unlock Door Before you start: Make sure your door station works as the main/sub door station. Purpose: 2 ways are available to unlock the door: unlocking door via password, and unlocking door via card.

  • Page 42: Appendix

    Video Intercom Door Station·Quick Start Guide Appendix Installation Notice While installing the indoor station, make sure that the distance between any two devices is far enough to avoid the howling and echo. The distance between two devices is recommended to be longer than 10 meters. Here devices refer to indoor station, outdoor station and main station.
  • Page 43 Video Intercom Door Station·Quick Start Guide UD09725B-A...

This manual is also suitable for:

D seriesDs-kd8102-vDs-kd8002-vmDs-kd3002-vmDs-kd3002

Table of Contents