Set Dst; View Open Source Software License; Upgrade And Maintenance - HIKVISION DS-KD8003 Series User Manual

DS-KD8003 Series Module Door Station User Manual
Time Zone
Select the device located time zone from the drop-down list.
Time Sync.
NTP
You should set the alarm receiver type, NTP server's IP address, port No., and interval.
Manual
By default, the device time should be synchronized manually. You can set the device time
manually or check Sync. with Computer Time to synchronize the device time with the
computer's time.

6.5.4 Set DST

Steps
1. Click Configuration → System → System Settings → Time Settings .
2. Enable DST.
3. Set the DST start time, end time and bias time.
4. Click Save to save the settings.

6.5.5 View Open Source Software License

Click Configuration → System → System Settings → About .
Click View Licenses to view the open source code license.

6.5.6 Upgrade and Maintenance

Reboot device, restore device parameters, and upgrade device version.
Reboot Device
Click Configuration → System → Maintenance → Upgrade & Maintenance .
Click Reboot to start reboot the device.
Restore Parameters
Click Configuration → System → Maintenance → Upgrade & Maintenance .
Default
The device will restore to the default settings, except for the device IP address and the user
information.
Restore All
79