DS-KD8003 Series Module Door Station User Manual
OSD Settings
You can customize the camera name, time/date format on the live view.
Steps
1. Click Image → OSD to enter the settings page.
Figure 6-13 OSD
2. Check to enable Display Name, Display Date or Display Week at your actual needs.
3. Edit the Camera Name.
Note
You can edit the camera name only when Display Name is enabled.
4. Select from the drop-down list to set the Time Format and Date Format.
5. Click Save to enable the settings.
Target Cropping
Steps
1. Click Image → Crop to enter the page.
2. Check Enable Target Cropping to enable the function.
3. Click
to capture photo.
4. Click
to start recording.
5. Select Cropping Resolution.
6. Click Save.
90