Configuration Settings; Set Indoor Station Network - HIKVISION HYU-559 User Manual

Only one arming mode can be set at one time. When you set another mode of arming
status, the former one is disarmed automatically.
If enabling the arming status successfully, you can hear a voice prompt "armed", and
the corresponding arming status will display on the main interface.
If enabling the disarming status successfully, you can hear a voice prompt "disarmed",
and the corresponding disarming status will display on the main interface.

6.3 Configuration Settings

Configuration settings is required before starting using the indoor station. It is necessary
to set the indoor station network, room No., linked devices, device time display, and so
on.

6.3.1 Set Indoor Station Network

Network connection is mandatory for the use of the indoor station. Set the network
parameters after activating the indoor station. What's more, the indoor station can work
normally in an intercom system only when its IP address is in the same network segment
with other devices in the same system.
Set Wired Network
The indoor station's default IP address is 192.0.0.64.
Two ways are available for you to set indoor station's IP address: DHCP, and set IP
address manually.
Steps:
1. Tap Settings -> Configuration -> Network to go to the network settings page.
Default admin password is 888999.
Video Intercom Indoor Station·User Manual
20