Table of Contents
Advertisement
DS-KD8003 Series Module Door Station User Manual
Set I/O Parameters
You can set I/O Parameters on PC Web.
Steps
1. Click Configuration → Video Intercom → I/O Settings .
2. Select Input 2 as Disable or Door Status. Select Input 3 and Input 4 as Disable or Exit Button.
Note
The Input 1 is Door Status by default.
3. Select Output 2 as Disable, Mechanical Doorbell or Electric Lock.
Note
The Output 1 is Electric Lock by default.
Sub Module Configuration
Steps
1. Click Intercom → Sub Module Configuration , and you can view the sub module information,
including No., module type, status, and version.
2. Click
to edit the sub module.
Display Module
Slide to adjust Screen Backlight Brightness.
●
Slide Enable Buzzer to enable the function.
●
Touch Screen Module
Adjust Screen Backlight Brightness.
●
Slide Enable Buzzer to enable the function.
●
Select Default Home Page which will be displayed on the screen of the module.
●
PMR Module
Click to enable power consumption selection.
You can select 8 W, 6 W or 4 W for the PMR Module.
Note
If the system power goes off, an external power supply of 12 V, 2 A for the main unit is
necessary.
100
Advertisement
Table of Contents
