HIKVISION DS-KD8003 Series User Manual page 110

DS-KD8003 Series Module Door Station User Manual
Figure 6-22 Door Parameters
2. Select Door No., and edit the Name.
3. Set Open Duration. When the time to open over the open duration you set, the door will be
locked again.
4. Select Relay Reverse as ON or Disable.
5. Click Save to enable the settings.
Elevator Control
Before You Start
Make sure that the door station is in the mode of main door station. Only the main door station
supports elevator control function.
Steps
1. Click Access Control → Elevator Control Parameter to enter the settings page.
102