Remote Configuration; Local Parameters Settings - HIKVISION DS-KD8003-IME2 User Manual

Select the device and click Delete to remove the selected device
from the list.
Refresh
Click Refresh to get the device information.
Optional: Set Device Information.
Click to edit device information.
●
Click to delete device information from the list.
●
Select Status and Device Type to search devices.
●

6.4 Remote Configuration

Click to set the parameters of the device.
Note
Run the browser, click
disable the Protected Mode.

6.4.1 Local Parameters Settings

You can configure the parameters of the live view, record files and
captured pictures. The record files and captured pictures are the
ones you record and capture by using the web browser. You can
also set and view the saving paths of the captured pictures and
recorded videos on the PC that running the web browser.
Live View Parameters
Stream Type
Set the stream type as Main Stream or Sub-stream.
Play Performance
Set the live view performance to Shortest Delay, Balanced or
Fluent.
Auto Start Live View
Check Yes to enable the function.
Image Format
Select the image format for picture capture.
Click Save to enable the settings.
→ Internet Options → Security to
Figure 6-3 Local Parameters
37