HIKVISION DS-KD8003 Series User Manual page 76

DS-KD8003 Series Module Door Station User Manual
Note
The green-yellow line in the package is for grounding.
9. Connect cables and insert the modules.
1) Connect Cable 1 and one end of Cable 2 to the corresponding interfaces of the Main Unit,
then place the Main Unit into the upper grid of the left gang box.
2) Connect the other end of Cable 2 to the input interface of Sub Module 1. Connect one end of
Cable 3 to the output interface of Sub Module 1 and insert it into the middle grid of the left
gang box.
3) Finish the wiring and inserting according to the cable number and the position shown as
below.
The cables connect to each module shown as below.
Figure 4-59 Install Mounting Frame
68