DS-KD8003 Series Module Door Station User Manual
Note
The module address is used to differentiate the sub modules.
●
K12 module, KK module and alarm in module belong to nametag modules.
●
The room No. for the main unit's call button is 1 by default; and the room No. for other call
●
buttons will start with 2. The number will increase continuously. For example, the room No. of
the first nametag module range from 2~7, the room No. of next nametag module will range
from 8~13.
Number Settings
Link the room No. and SIP numbers.
Click Number Settings to enter the page.
Click Add, set the Room No. and SIP numbers in the pop-up dialog box.
6.5.18 Access Control Settings
Door Parameters
Set the parameters of the door which is linked to the device.
Steps
1. Click Access Control → Door Parameters to enter the settings page.
Figure 6-21 Number Settings
101