Example 2 - H3C SR6616 Manual

NOTE:
The subslot number Y of fixed GE interfaces on a FIP is 0.
•
If the MIM-2GBE module is installed in slot 1 of the FIP-110, the two GigabitEthernet interfaces
0 and 1 on the MIM-2GBE are numbered GigabitEthernet 3/1/0 and GigabitEthernet 3/1/1,
respectively,
•
If the MIM-2GBE module is installed in slot 2 of the FIP-110, the two GigabitEthernet interfaces
0 and 1 on the MIM-2GBE are numbered GigabitEthernet 3/2/0 and GigabitEthernet 3/2/1,
respectively.

Example 2

A HIM-4GBE module is installed on a FIP-210 in slot 3 of the router.
•
The two fixed GigabitEthernet interfaces 0 and 1 on the FIP-210 are numbered GigabitEthernet
3/0/0 and GigabitEthernet 3/0/1, respectively.
•
If the HIM-4GBE is installed in slot 1 of the FIP-210, the GigabitEthernet interfaces 0 and 3 on
the HIM-4GBE are numbered GigabitEthernet 3/1/0 to GigabitEthernet 3/1/3, respectively.
•
If the HIM-4GBE is installed in slot 2 of the FIP-210, the GigabitEthernet interfaces 0 and 3 on
the HIM-4GBE are numbered GigabitEthernet 3/2/0 to GigabitEthernet 3/2/3, respectively.
4-4