Rpe-X5 - H3C SR6616 Manual

Item
USB console port
Management Ethernet port
USB port
Reset button
Hot swapping
NOTE:
• SDRAM stores running configuration and buffers data during data forwarding.
• Non-volatile random access memory (NVRAM) stores system exception logs.

RPE-X5

CAUTION:
If you connect a large-sized USB drive directly to the RPE-X5 MPU, the right ejector lever of the
MPU might be damaged. You must use a USB extension cable to connect a large-sized USB drive
to the USB port on the MPU.
Figure2-3 RPE-X5 MPU
(1) USB port
(3) Management Ethernet port (MANAGEMENT)
(5) MPU status LEDs
Table2-3 RPE-X5 specifications
Item
Flash
Memory type and size
Console/AUX port
Management Ethernet port
USB port
Hot swapping
Specification
1
1 (10Base-T/100Base-TX/1000Base-T)
1
Host mode, type A connector
1
Supported
1
4
5
Specification
4 GB
DDR4 SDRAM
Default: 4 GB
1, 9600 bps (default) to 115200 bps
1 (10Base-T/100Base-TX/1000Base-T)
1 USB 3.0 port (Host mode, Type A connector)
Supported
2
3
(2) Console/AUX port
(4) Management Ethernet port LED
2-3