H3C SR6616 Manual page 67

LED
(red)
6
ALM
(red)
LINK/ACT
7
SFP0 through
SFP3
8
(yellow/green)
Figure3-7 MCP-X2 LEDs
1
Table3-8 MCP-X2 LED description
LED
GE0 through
1
GE3
(yellow/green)
CF
2
Status
Steady on
Off
Steady on
Off
Steady green
Flashing green
Steady yellow
Flashing yellow
Off
Steady green
Flashing green
Steady yellow
Flashing yellow
9 8
Status
Off
Steady green
Flashing green
Steady yellow
Flashing
yellow
Off
3-10
Description
The system power is insufficient.
The system is operating correctly and no alarm
has occurred.
A fault has occurred on the system or the
available power is insufficient. In this state,
identify the system log immediately.
The corresponding interface is not connected.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
A 10/100 Mbps link is present.
Data is being received or transmitted at 10/100
Mbps.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
A 100 Mbps link is present.
Data is being received or transmitted at 100
Mbps.
2
7 7
Description
The corresponding interface is not connected.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
A 10/100 Mbps link is present.
Data is being received or transmitted at 10/100
Mbps.
No CF card is present or the CF card is not
recognizable.
3
4
5
５
6