Sap-24Gbp - H3C SR6616 Manual

Item
Transmission distance
Supported frame format
Interface speed and duplex
mode

SAP-24GBP

The SAP-24GBP has 24 high-performance fiber SFP ports that can be both routed and switched.
One two-color LED is available for each port to indicate their activity and link status. The module also
has a RUN LED to indicate the module operating status.
Front panel
Figure2-24 SAP-24GBP front panel
5
(1) SFP ports 0 to 23
(3) LEDs for SFP ports 0 to 23
(5) Captive screw
Technical specifications
Item
Flash
Memory type and size
NVRAM
Max power consumption
Connector type
Number of interfaces
Interface standards
Supported frame format
Interface speed
Specification
100 m (328.08 ft)
Ethernet_II
Ethernet_SNAP
10 Mbps
100 Mbps
1000 Mbps
4
Specification
4 MB
•
Default—Two 1-GB DDR2 SDRAMs
•
Maximum—Two 2-GB DDR2 SDRAMs
128 KB
150 W
SFP
24
802.3, 802.3u, and 802.3ab
Ethernet_II
Ethernet_SNAP
1000 Mbps (recommended)
Full duplex
Full/half duplex, auto-negotiation
Full/half duplex, auto-negotiation
Full duplex, auto-negotiation
1
3
(2) SAP module status LED (RUN)
(4) Ejector levers
2-28
2