Sap-48Gbp - H3C SR6616 Manual

Fixed Ethernet port specifications
Specifications of the SAP-24GBP fixed Ethernet ports and the FIP-110 fiber combo ports are the
same. For more information, see Table2-20.

SAP-48GBP

The SAP-48GBP has 48 high-performance fiber SFP ports that can be both routed and switched.
One two-color LED is available for each port to indicate their activity and link status. The module also
has a RUN LED to indicate the module operating status.
Front panel
Figure2-25 SAP-48GBP front panel
5 4
(1) SFP ports 0 to 47
(3) LEDs for SFP ports 0 to 47
(5) Captive screw
Technical specifications
Item
Flash
Memory type and size
NVRAM
Max power consumption
Connector type
Number of interfaces
Interface standards
Supported frame format
Interface speed
Fixed Ethernet port specifications
Specifications of the SAP-48GBP fixed Ethernet ports and the FIP-110 fiber combo ports are the
same. For more information, see Table2-20.
1
3
(2) SAP module status LED (RUN)
(4) Ejector levers
Specification
4 MB
•
Default—Two 1-GB DDR2 SDRAMs
•
Maximum—Two 2-GB DDR2 SDRAMs
128 KB
144 W
SFP
48
802.3, 802.3u, and 802.3ab
Ethernet_II
Ethernet_SNAP
1000 Mbps (recommended)
Full duplex
2-29
2