H3C SR6616 Manual page 32

Combo interface specifications
Table2-19 FIP-110 copper Ethernet port specifications
Item
Connector
Interface type
Supported frame format
Interface speed and
duplex mode
Table2-20 FIP-110 fiber Ethernet port specifications
Item
Connector
Transceiver module type
Interface standards
Duplex mode
FIP-210
You can plug up to two HIMs into the FIP-210 to provide high-speed service processing or plug up to
two MIMs into the FIP to provide high-density narrowband aggregation. The FIP-210 also supports
the mix of a HIM and a MIM.
Front panel
Figure2-13 FIP-210 front panel
5
(1) Combo interface 1
(4) Slot 2
The OPEN BOOK mark indicates that the operator must read the following document before working
with the FIP:
Table2-21 References for FIP operations
Operation
Install and remove the FIP
Install and remove MIMs
Specification
RJ-45
Autosensing
Ethernet_II
Ethernet_SNAP
10 Mbps
100 Mbps
1000 Mbps
4
(2) Combo interface 0
(5) OPEN BOOK mark
Reference
H3C SR6616 Router Installation Guide
2-16
Half/full duplex, auto-negotiation
Half/full duplex, auto-negotiation
Full duplex, auto-negotiation
Specification
LC
SFP
802.3, 802.3u, and 802.3ab
1000 Mbps, full duplex
3
1
2
(3) Slot 1