H3C SR6616 Manual page 39

Table2-25 1000BASE-X-SFP port specifications
Item
Connector
Transceiver module type
Interface standards
Operating mode
Table2-26 100/1000BASE-T port specifications
Item
Connector
Operating mode
FIP-600
The FIP-600 provides four combo interfaces. It supports a maximum of two HIMs.
Front panel
Figure2-19 FIP-600 front panel
5
(1) Combo interface 1
(4) Slot 2
Technical specifications
Item
Flash
Memory type and size
NVRAM
Combo interfaces
Specification
RJ-45
100 Mbps autosensing
1000 Mbps autosensing
4
(2) Combo interface 0
(5) OPEN BOOK mark
Specification
8 MB
•
Default—Two 2-GB DDR3 SDRAMs
•
Maximum—Two 2-GB DDR3 SDRAMs
The SDRAMs must be used in pairs and must be the same size.
They must be inserted in slot 1 or slot 3. These two slots are located near
the backplane connectors on the FIP module.
128 KB
2
2 copper ports (automatic
MDI/MDIX)
2-23
Specification
LC
SFP
802.3, 802.3u, and 802.3ab
1000 Mbps, full duplex
Full duplex, auto-negotiation
Full duplex, auto-negotiation
3
(3) Slot 1
10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
1000 Mbps, full-duplex
1
2