H3C SR6616 Manual page 77

LED
SFP 0 to SFP
(yellow/green)
23
Figure3-24 SAP-48GBP LEDs
Table3-20 SAP-48GBP LED description
LED
Status LEDs of
1
SFP 0 to SFP
47
(yellow/green)
System status
2
LED
(green)
Figure3-25 SAP-20GE2XP LEDs
5
Table3-21 SAP-20GE2XP LED description
LED
RUN
1
(green)
Status Description
Steady green A 1000 Mbps link is present.
Flashing green Data is being received or transmitted at 1000 Mbps.
Steady yellow A 100 Mbps link is present.
Flashing yellow Data is being received or transmitted at 100 Mbps.
1
Status Description
Off No link is present.
Steady green A 1000 Mbps link is present.
Flashing green Data is being received or transmitted at 1000 Mbps.
Steady yellow A 100 Mbps link is present.
Flashing yellow Data is being received or transmitted at 100 Mbps.
No power input is available or the SAP-48GBP has
Off
failed.
Slow flashing (1
The SAP-48GBP is operating correctly.
Hz)
Application program is being loaded (in this case,
Fast flashing (8 never power off the device or hot-swap the
Hz) SAP-48GBP. Otherwise, the SAP-48GBP might be
damaged), or the SAP-48GBP is not working.
4
Status Description
No power input is available or the SAP-20GE2XP has
Off
failed.
Slow flashing (1
The SAP-20GE2XP is operating correctly.
Hz)
Fast flashing (8 Hz)
System software is being loaded or the
3-20
3 2 1
3
2