Removable Components; Mpus; Rpe-X1 - H3C SR6616 Manual

2

Removable components

MPUs

The RPE-X1, RSE-X1, RPE-X3, RPE-X5, RPE-X5E, MCP-X1, and MCP-X2 MPUs are available for
the router. You can select them as needed.
If you order an RPE-X1, RPE-X3, RPE-X5, or RPE-X5E MPU, you must also order a compatible
carrier. For the MPU carrier installation procedure, see H3C SR6616 Routers Installation Guide.

RPE-X1

Figure2-1 RPE-X1 MPU
(1) Reset button (RESET)
(3) Active/Standby LED (ACT)
(5) LINK/ACT LED for the Ethernet management port
(7) Console port (CONSOLE)
(9) Host-mode USB port 0 (0)
(11) USB 1 LED
(13) CF card
Table2-1 RPE-X1 specifications
Item
Flash
Memory type and size
NVRAM
Console port
AUX port
Management Ethernet port
0
1 2 6 7
5
3
4
Specification
4 MB
•
•
128 KB
1
9600 bps (default) to 115200 bps
1
9600 bps (default) to 115200 bps
1 (10Base-T/100Base-TX/1000Base-T)
14
13 12
8 9 10 11
(2) RUN LED
(4) Alarm LED (ALM)
(6) Management Ethernet port (MANAGEMENT)
(8) AUX port (AUX)
(10) Device-mode USB port 1 (1)
(12) CF card LED
(14) CF card button
Default—One 1-GB DDR2 SDRAM
Maximum—Two 1-GB DDR2 SDRAMs
2-1