Working With Projects - Yamaha S Rev1 Owner's Manual

48
Chapter 4—Basic Operation

Working with Projects

This section explains how to load, save, title, protect, and delete projects from the Inter-
nal, PC Card, and CD-ROM drives. All these operations are carried out on the Project
pages shown below. In the project list, a dotted box highlights the selected project. See
page 7 for more information about projects.
2-ch mode
2-ch x2 mode
Loading Projects
Projects can be loaded from the following drives: Internal Card, PC Card, or CD-ROM.
Use the [PROGRAM] button to locate the Project page.
1
Use the cursor buttons to select a drive button, and then press [ENTER] to
2
make it the active drive.
The projects stored on the active drive appear in the project list.
Use the DATA wheel or the [–1/DEC] and [+1/INC] buttons to select a project
3
from the list.
Use the cursor buttons to select the LOAD button, and then press [ENTER].
4
A confirmation message appears. Select YES to load the project, or select NO to cancel
the operation.
The message "LOADING PROJECT..." appears while the selected project and its pro-
grams are loaded. The Program page appears when loading, which takes about 30 sec-
onds, is complete.
SREV1—Owner's Manual
4-ch mode