Assigning Inputs
This section explains how to assign the AES/EBU inputs and slot inputs to channels.
When a four input I/O card, such as the MY4-AD, is installed, only the first four inputs
of that slot are available.
Use the [UTILITY] button to locate the DIO page.
1
2-ch mode
2-ch x2 mode
Use the cursor buttons to select the dots in the INPUT SELECT section of the
2
page.
A dotted circle indicates that an input is assignable; two dots indicate that an input is
unavailable.
Press the [ENTER] button to assign an input to a channel.
3
The input is assigned to the channel and the dotted circle changes to a solid dot.
Assigning Inputs
4-ch mode
SREV1—Owner's Manual
35