Installing The Plg150-An; Included Items; Required And Recommended Items; Synthesizer/Tone Generator/Sound Card Compatible With The Modular Synthesis Or Xg Plug-In Systems - Yamaha PLG150-AN Owner's Manual

Analog physical modeling plug-in board modular synthesis plug-in system

Hide thumbs Also See for PLG150-AN:

Table of Contents

Installing the PLG150-AN

For detailed instructions on installing the PLG150-AN, refer to the owner's manual of the Plug-in-

compatible "mother" device (e.g., CS6x, MU128, etc.).

The following items have been included in the package of your new PLG150-AN. Please make sure

that you have them all before starting to setup and use the instrument. If an item is missing, contact

the store or dealer from which you purchased the PLG150-AN.

• PLG150-AN board

• PLG150-AN Owner's Manual (this book)

• Three ﬂoppy disks

In addition to the included items listed above, you should also have the following:

Synthesizer/Tone Generator/Sound Card Compatible with the Modu-

lar Synthesis or XG Plug-in Systems

In order to use the PLG150-AN, you'll need a synthesizer, tone generator or sound card compatible

with the Modular Synthesis Plug-in System or the XG Plug-in System. Compatible instruments

include the CS6x, MU128, and the SW1000XG. The synthesizer/tone generator/sound card should

also have an available slot or space for installing the PLG150-AN.

Table of Contents