I/O Options & The Srev1; Available I/O Cards - Yamaha S Rev1 Owner's Manual

82
Chapter 9—I/O Options
I/O Options & the SREV1
In addition to the two AES/EBU inputs and outputs, the SREV1 features two mini
YGDAI (Yamaha General Digital Audio Interface) slots for use with optional I/O cards,
which offer several analog I/O options and digital I/O interfaces in all the popular dig-
ital audio interconnect formats, including AES/EBU, ADAT, and Tascam.
The Yamaha AW4416 Audio Workstation, 01V Digital Mixing Console, D24 Digital
Multitrack Recorder, DME32 Digital Mixing Engine, AD824 AD Converter, and DA824
DA Converter also use mini YGDAI I/O cards. Note that the "CD" series of YGDAI cards
used by the Yamaha 02R Digital Recording Console and 03D Digital Mixing Console
are not interchangeable with mini YGDAI cards.
Slot inputs can be freely assigned to SREV1 channels. See "Assigning Inputs" on page
35 for more information. Channel-to-slot output assignments are fixed. See "Output
Assignments" on page 9 for more information.

Available I/O Cards

The following mini YGDAI cards are currently available. See the Yamaha Professional
Audio Web site at the following URL for up-to-date news on mini YGDAI cards:
<http://www.yamaha.co.jp/product/proaudio/homeenglish/>.
MY8-AD: 8 Analog Inputs
The MY8-AD card provides eight electronically balanced analog inputs via phone jack
connectors, with 20-bit 128-times oversampling A/D converters.
MY4-AD: 4 Analog Inputs
The MY4-AD card provides four electronically balanced analog inputs via female XLR
connectors, with 24-bit 128-times oversampling A/D converters.
MY4-DA: 4 Analog Outputs
The MY4-DA card provides four electronically balanced analog outputs via male XLR
connectors, with 20-bit 128-times oversampling D/A converters.
MY8-AT: ADAT
The MY8-AT card provides ADAT format digital I/O via two MultiChannel Optical
Digital Interface connectors, and supports 16-, 20-, and 24-bit wordlengths.
MY8-AE: AES/EBU
The MY8-AE card provides AES/EBU format digital I/O via a 25-pin D-sub connector,
and supports 16-, 20-, and 24-bit wordlengths.
MY8-TD: Tascam
The MY8-TD card provides Tascam format digital I/O via a 25-pin D-sub connector,
and supports 16-, 20-, and 24-bit wordlengths. A BNC connector is provided for word-
clock output.
MY8-TD cards feature a device selector switch (EXT: 88/INT: 38) that should be set to
match the device being connected. This should be set to "EXT: 88" when connecting a
Tascam DA-88, or "INT: 38" when connecting a Tascam DA-38 or other digital audio
device.
SREV1—Owner's Manual