Yamaha S Rev1 Owner's Manual page 25

G
MIDI IN & OUT ports
These standard MIDI IN and OUT ports and are used to connect the SREV1 to other
MIDI equipment for remote operation using MIDI Program Change and Control
Change messages. See "MIDI & the SREV1" on page 68 for more information.
H
SERIAL 1 & 2 ports
These 8-pin mini DIN connectors are used to connect up to four SREV1s in a multi-
ple-unit system. See "Multiple SREV1s" on page 63 for more information.
I REMOTE port
This 9-pin D-sub connector is used to connect the RC-SREV1. See "Connecting the
RC-SREV1 Remote Controller" on page 22 for more information.
J
WORD CLOCK IN connector
This BNC connector can be used to receive an external wordclock signal. See "Word-
clock Connections" on page 74 for more information.
SREV1 Rear Panel
SREV1—Owner's Manual
15