58
Chapter 5—Editing Programs
Use the cursor buttons to select the G (gain), F (frequency), Q (width), or T
2
(Filter Type) parameter.
Use the faders, DATA wheel, or [–1/DEC] and [+1/INC] buttons to adjust the
3
selected parameter.
The parameter ranges are as follows.
Parameter
Gain (G)
Frequency (F)
Q
Filter Type (T)
1. Can be used as a peaking EQ (10–0.10) or low shelving EQ (L.SHELF).
2. Peaking EQ.
3. Can be used as a peaking EQ (10–0.10), high shelving EQ (H.SHELF), or low pass filter (LPF).
4. The HPF is bypassed when set to THRU.
5. The HIGH band is bypassed when set to THRU.
Note that when the HPF is set to THRU, the HPF parameter on the Main 2 page is inac-
tive.
SREV1—Owner's Manual
HPF
LOW
—
16.0 Hz–23.6 kHz (1/12 oct steps)
—
PEAKING,
4
THRU
, HPF
L.SHELF
1
2
MID
–18 dB to +18 dB (0.1 dB steps)
10.0–0.10
PEAKING
3
HIGH
PEAKING,
H.SHELF, LPF,
5
THRU