Choosing I/O Cards - Yamaha S Rev1 Owner's Manual

Specifications for the currently available I/O cards are as follows.
Card Format
MY8-AD Analog input
MY4-AD Analog input
MY4-DA Analog output
MY8-AT ADAT
MY8-AE AES/EBU
MY8-TD Tascam
As these specifications show, analog I/O cards offer either inputs or outputs, while dig-
ital I/O cards offer both inputs and outputs.
When an I/O card not listed above, for example, a future addition to the mini YGDAI
series, is installed, the message "UNKNOWN CARD" appears.

Choosing I/O Cards

For analog I/O with XLR-type connectors, an MY4-AD card could be installed in, say,
SLOT 1, and an MY4-DA card in SLOT 2, although it makes no difference which card
is installed in each slot.
To connect the SREV1 to other digital audio equipment, you must determine which
digital interconnect format—AES/EBU, ADAT, or Tascam—the other equipment sup-
ports, and then install the necessary I/O cards.
The following table shows which cards to use when connecting the SREV1 to other
Yamaha digital audio products. Each product can be connected by using the AES/EBU,
ADAT, or Tascam interface format.
AW4416
An external wordclock can be sourced via digital I/O cards. See "Selecting the Word-
clock Source" on page 75 for more information.
Using ADAT I/O cards in certain devices can cause wordclock-lock problems, so it's rec-
ommend that you source wordclock signals via I/O cards of another format.
See your Yamaha dealer for more information.
In Out A/D
20-bit,
8 —
128 times
24-bit,
4 —
128 times
— 4 —
8 8 —
8 8 —
8 8 —
Max. # of
Unit
Cards
2
AD824
1
DA824
1
DME32
4
D24
4
01V
1
4 single or
02R
2 double
03D
1

Choosing I/O Cards

D/A Wordlength
— —
— —
20-bit,
—
128 times
— 16, 20, 24
— 16, 20, 24
— 16, 20, 24
Format Card for Other Unit
ADAT MY8-AT
Tascam MY8-TD
AES/EBU MY8-AE
As above
As above
As above
As above
As above
ADAT CD8-AT
Tascam CD8-TDII
AES/EBU CD8-AE or CD8-AE-S
As above
Connectors
Phone jack (balanced) x8
XLR-3-31 type (balanced) x4
XLR-3-32 type (balanced) x4
Optical x2
25-pin D-sub
(cable not included)
25-pin D-sub
BNC wordclock output
Card for
SREV1
MY8-AT
MY8-TD
MY8-AE
MY8-AT
MY8-TD
MY8-AE
SREV1—Owner's Manual
83