Working With The Library - Yamaha S Rev1 Owner's Manual

Working with the Library

This section explains how to load, save, title, protect, and delete programs from the
Internal Card, PC Card, and CD-ROM. These operations are carried out on the Library
pages shown below. In 2-channel x2 mode, two Library pages are available: Library-A
and Library-B. In the program list, a dotted box highlights the selected program. In the
DRIVE section of the page, INTERNAL is the Internal Card, CD-ROM is the CD-ROM
drive, and PCMCIA is the PC Card.
2-ch mode
2-ch x2 mode—A
Loading Programs from the Library
Programs can be loaded from the following drives: Internal Card, PC Card, or
CD-ROM. The loaded program becomes the current program. The preset programs on
the supplied CD-ROM are loaded into the Internal Card at the factory.
Use the [PROGRAM] button to locate the Library page.
1
Use the cursor buttons to select a drive button, and then press [ENTER] to
2
make it the active drive.
The programs stored on the active drive appear in the program list.
Use the DATA wheel or the [–1/DEC] and [+1/INC] buttons to select a program
3
from the list.
Use the cursor buttons to select the LOAD button, and then press [ENTER].
4
If the current program contains unsaved changes, a warning message appears. Select
YES to discard the changes and load the selected program, or select NO to cancel the
operation.
The selected program, and its impulse-response data, is loaded and its title appears on
the display.

Working with the Library

4-ch mode
2-ch x2 mode—B
SREV1—Owner's Manual
45