Connecting The Power Cord; Turning On & Off The Srev1; Turning On & Off The Rc-Srev1 - Yamaha S Rev1 Owner's Manual

26
Chapter 3—Getting Started

Connecting the Power Cord

Warning: Turn off all equipment before making any power connections.
Connect the socket-end of the supplied power cord to the AC IN
socket on the rear panel of the SREV1. Connect the plug-end to a
suitable AC wall outlet, one that conforms to the power supply
requirements stated on the SREV1 rear panel.
Turning On & Off the SREV1
To prevent loud clicks and thumps in your speakers, turn on your
audio equipment in the following order (reverse this order when
turning off)—sound sources, SREV1, RC-SREV1, recorder, mixer,
monitoring power amplifiers.
To turn on the SREV1, press the [POWER] switch.
1
The POWER indicator lights up.
See "SREV1 Startup" on page 32 and "About the Internal Operations
at Startup" on page 33 for more information.
To turn off the SREV1, press the [POWER] switch again.
2
The POWER indicator goes out.
Turning On & Off the RC-SREV1
Note: In general, set the RC-SREV1 POWER switch to the ON position and use the
SREV1 POWER switch to turn on and off the system. When using a custom-made remote
cable, and an optional AC adapter, if the RC-SREV1 is turned on before the SREV1, the
SREV1 must be turned on within 50 seconds. During this time the message "COULD
NOT COMMUNICATE WITH SREV1. CHECK THE CABLE CONNECTION AND
SREV1'S POWER. THEN TURN ON RC-SREV1 AGAIN." appears. Therefore, turn on
the RC-SREV1 after the SREV1.
To turn on the RC-SREV1, set its [POWER] switch to the ON
1
position.
The startup screen appears, and after communication is established
between the SREV1 and RC-SREV1, the Program page appears.
See "RC-SREV1 Startup" on page 32 for more information.
To turn off the RC-SREV1, set its [POWER] switch to the OFF
2
position.
The RC-SREV1 receives its power from the SREV1 via the remote
cable, so if it doesn't come on, make sure that the remote cable is con-
nected properly and that the SREV1 is turned on.
SREV1—Owner's Manual
POWER
ON OFF
POWER
ON OFF