Post Eq - Yamaha S Rev1 Owner's Manual

Post EQ

The post-convolution EQ consists of a fully parametric 4-band EQ. Parameters can be
adjusted for each channel individually on the Post EQ page. In 4-channel mode, two
Post EQ pages are available: Post EQ Front and Post EQ Rear. Likewise, in 2-channel x2
mode, with Post EQ-A and Post EQ-B pages. In addition to numeric values, EQ settings
are displayed graphically. Inactive parameters appear shaded. Q, for example, is not
active when, say, the HIGH band is set to H.SHELF.
The Post EQ pages for each mode are shown below.
2-ch mode
4-ch mode—Front
2-ch x2 mode—A
Use the [PARAMETER FINE] button to locate the Post EQ page.
1
Use the ON/OFF button next to each EQ graph to turn on and off the Post EQ for each
channel.
Use the cursor buttons to select the G (gain), F (frequency), Q (width) or T
2
(Filter Type) parameter.

Post EQ

4-ch mode—Rear
2-ch x2 mode—B
SREV1—Owner's Manual
59