Setting Parameters With The Function Buttons - Yamaha TNR-W Manual

Setting Parameters with the Function Buttons

Settings can be made by holding one of the ten function buttons located on either side of the
TENORI-ON ([L1] — [L5], [R1] — [R5]) and operating the LED buttons.
When a function button is pressed the current setting for that button will appear on the LED
button matrix, and the setting can be changed by pressing the appropriate LED button(s).
Settings available via the function buttons also appear on the LCD display during
adjustment. At this time you can also use the jog dial for finer adjustment.
Function Buttons
[L1]
[L2]
[L3]
[L4]
[L5]
The settings available via the function buttons are as follows:
Button Function
[L1] Instrument
[L2] Sound Length
[L3] Octave
Loop Point (Score
Mode)
[L4]
Rotation (Random
Mode)
[L5] Loop Speed
[R1] Layer No.
[R2] Master Tempo
[R3] Master Transpose
[R4] Volume
[R5] Block No.
LED Buttons
ÅÍÎÏ ∞
≈01-Score Ω01
ç01/01:SoftBeep
√00:00:00 ≥
LCD Display
Jog Dial
Description
Selects the voice for the current layer.
Sets the gate time (note length) for all active notes in the current layer.
Sets the octave for all active notes in the current layer.
Sets the loop range when a Score Mode layer is selected.
Sets the direction and speed of rotation for active note shapes in the Random
Mode.
Sets the beat length (the speed of the loop indicator) for Score Mode layers
only.
Switches layers.
Sets the tempo for all layers and blocks.
Sets transposition for all layers and blocks.
Sets the volume for each layer (common to all blocks).
Switches blocks. Also used for layer and block copy.
Parameter Settings
Setting Parameters with the Function Buttons
Function Buttons
[R1]
[R2]
[R3]
[R4]
[R5]
TENORI-ON Manual
Page
24
25
26
27
28
29
30
31
32
33
34
23