Table of Contents
Advertisement
Operation
Work Orders Created On the
Metered Dispense Valve
X
Y
Z
F
. 43
IG
X
ENTER WORK ORDER - identifies the Enter
Work Order options screen.
Y
NUMBERS/CHARACTERS - available
numbers and character that can be entered
to create the unique work order
identification number.
Z
123 ABC -/. - sets the character parameters
used to create the unique work order
identification number.
AA X/✔ - X cancels the work order before
entering it in the system. ✔ accepts the
work order and enters it into the system.
Work Orders can have a maximum of twenty
characters.
To enter a new work order at the metered
dispense valve:
1.
Use the arrows to position the cursor
over a number or character for selec-
tion.
2.
Press ENTER after each selection.
3.
When the complete work order number
has been entered, select the "✔" (AA).
Press ENTER.
4.
The DISPENSE screen displays.
24
Setup Menus
AA
F
. 44
IG
DEVICE INFORMATION
The Device Information Screen is used for
diagnostics only.
Device Information Screen
Unique device
identification number
*CRC32 is the 32-bit Cyclical Redundancy
Check value linked to the firmware release
F
. 45
IG
REGISTER
See REGISTER in the Installation section of
this manual, page 14.
CRC32*
***indicates
device
connected to the Pulse network
3A7397E
is
Advertisement
Table of Contents
