Set-Up; Main Menu Screen; Register - Graco Pulse 26C935 Installation And Operation Manual

Set-Up

Set-Up

Main Menu Screen

This screen provides access to the main
metered dispense valve functions:
•
DISPENSE, page 20
•
SET-UP, page 24
•
UTILITY MENU, page 26
F . 12
IG

Register

The metered dispense valve must be
registered with the Pulse Fluid Management
Software before it can dispense fluid.
1. Put the Pulse Fluid Management
Software into DISCOVERY Mode.
2. From the MAIN MENU screen use the
UP and DOWN arrow on the navigation
pad to select SET-UP.
F . 13
IG
3. From SET-UP, use the UP and DOWN
arrow on the navigation pad to select
REGISTER (F
IG
14
. 14).
F . 14
IG
4. Press ENTER.
REGISTERING appears in the middle of
the display during registration (F
F . 15
IG
5. After the metered dispense valve has
successfully registered with the Pulse
Fluid Management Software,
REGISTERED displays (F
the UTILITY MENU screen displays.
F . 16
IG
. 15).
IG
. 16). Then
IG
3A7397E