Table of Contents
Advertisement
Operation
F
. 38
IG
5.
Press the UP and DOWN arrows to
toggle between the presets (up to 5) that
were programmed using the Pulse Fluid
Management Software.
F
. 39
IG
6.
Press ENTER when the desired Preset
value is displayed.
7.
Use the RIGHT or LEFT arrow to
ACTIVATE (D). Press ENTER.
8.
Pull trigger to dispense fluid.
Complete the Dispense
1.
When the preset amount has been
dispensed, the metered dispense valve
will stop dispensing.
2.
Options:
•
TOPOFF (M) to add additional fluid
(See TOPOFF).
NOTE: The amount of TOPOFF
allowed can be limited during
metered dispense valve
programming.
22
OR . . .
•
END (G) to finish the dispense.
Press ENTER to select END.
TOPOFF
The TOPOFF feature allows for adding
additional fluid after the preset amount of
fluid has been dispensed. Topoff amounts
are programmed in the Pulse Fluid
Management Software.
1.
To TOPOFF (M), press ENTER to select
TOPOFF on the display.
2.
Squeeze trigger to dispense additional
fluid. The display will continue to count
the dispensing amount.
3.
The TOPOFF ends when the trigger is
released or the maximum fluid allowed
TOPOFF value is reached. The cursor
will be over STOP on the display.
F
. 40
IG
4.
Press ENTER.
3A7397E
Advertisement
Table of Contents
