Table of Contents
Advertisement
Setup
Gateway Screens
Fieldbus Screens
PROFIBUS
PROFINET
DeviceNet
EtherNet/IP
The Gateway screens are used to configure the fieldbus.
These screens are shown only if a CGM is correctly
installed in your system. See Installation on page 3.
1. With the system on and enabled, press
access the Setup screens.
2. Press the left arrow key once to navigate to the main
Gateway screen. See F
F
. 4: Example Fieldbus Screen
IG
3A1704H
Page
5
6
7
7
. 4.
IG
PROFIBUS Fieldbus Screens
These screens are shown only if you have a PROFIBUS
Fieldbus CGM installed. See Kits on page 2.
Screen 1
This screen enables the user to set the device address,
install date, location tag, function tag, and description.
to
F
. 5: PROFIBUS Fieldbus Screen 1
IG
Screen 2
This screen displays the hardware revision, system
serial number, and data map identification information.
F
. 6: PROFIBUS Fieldbus Screen 2
IG
Setup
5
Advertisement
Table of Contents
