Table of Contents
Advertisement
3.5 XTOOL Operation
Preparation:
1. Firmware ZIP upgrade package：XTOOL (V1.0.2.42 or higher) -packaged in the ZIP
(Go to RGBlink website to download：https://rgblink-web.azurewebsites.net/xpose_software.aspx)
2. Firmware ZIP upgrade package：Q16pro BIN File-packaged in the ZIP
(Go to RGBlink website to download： https://rgblink-web.azurewebsites.net/productsinfo.aspx?id=251)
3. Upgrade Description：
Steps:
Open the XTOOL, click" Connection" . Select "Serial Comm" in the dialog box and then click
1.
"Confirm".
If the device is connected, the circle indicating connection status at the bottom left corner turns
2.
green. If the connection fails, the circle remains red. Device type and SN are shown at the bottom
right corner.
Q16pro Gen2
Power on the device and connect PC and device by Serial Cable.
User Manual
67
Advertisement
Table of Contents
