Table of Contents
Advertisement
Device Connection
1. Click the device you need in the <All Devices>.
2. Click
in the <Chosen Device>.
Note: Please check first to make sure that the model chosen in Find Device, and communication type in
Communication Setting are both correct.
Output Setting
Click any output port, the board where the port
locates is selected. Users can do settings to the port
now.
A red rectangle flashes around the chosen port
when it is clicked.
Resolution:
SDI and HDMI output modules support resolution
settings.
Output resolution supports ALL and MODULE
Format Range optional.
All Format Range: is to set output resolution of all
output modules to be the same. Resolutions can be
chosen as shown in the right figure.
Module Format Range: is to set the resolution of all
output ports of the selected module to be the same.
The resolution of other modules can be set to different
resolutions.
Resolutions can be chosen as shown in the right figure.
Q16pro Gen2
User Manual
49
Advertisement
Table of Contents
