Table of Contents
Advertisement
Customize Container
Click this icon at the bottom of
template list.
Monitor Layout: Auto or Manual.
Steps of creating a container are as follows:
1. Fill in H Total/V Total and Row/Column,it will
calculate H item and V item automatically.
For example, if you would like to create a container
with 1 row and 4 columns and each display has a width
of 1920 and a height of 1080, the total width will be
7680 and the total height will be 1080.
2. Click <Create>, the container will display in the
interface, and shows the width and height of each
Display.
3. Click<Save> to save the container.
3.
Container Adjustment
1. Move: Drag the boarder of the display area to move
its place in the interface.
2. Scale: Click icon
to shrink, Click
the proportion of display area on interface.
3. Cancel: Press and hold
group.
Display
Output List
White one：available.
Gray one：unavailable.
Operation Steps：
Left-mouse click the output and drag it to the display
of the set container.
Replacement：
Drag and drop the output into the corresponding
display. The output being replaced will turn from
gray to white in the list.
Q16pro Gen2
to enlarge
to cancel the screen
User Manual
57
Advertisement
Table of Contents
