Use Function Keys - RGBlink Q16pro Gen2 User Manual

The default IP Address of CPX is 192.168.0.200 and Q16pro Gen2 is 192.168.0.100.
1. If IP address of Q16pro Gen2 and CPX have not been modified before, that is, the IP of CPX and
Q16pro Gen2 are in the same LAN, you can directly connect CPX and Q16pro Gen2 via a network
cable.
2. If you use Network Communication, and the IP of CPX and Q16pro are not in the same LAN,
please refer to the following steps to set the IP of CPX and Q16pro Gen2 to the same LAN for data
exchange.
IP Setting Steps: Menu > > Search > > Network Communications > > Local IP (modify CPX
IP).
If CPX and Q16pro Gen2 are in the same LAN, the Connection in the upper left corner will show
Connected after successful communication connection.
3. You can also achieve control of multiple devices at the same time by using a switch.

3.1.4 Use Function Keys

CPX will enter Matrix Mode by default after booted up. You can use function keys [ALL], [SAVE],
[ENTER], [LOAD] for more operations.
3.1.4.1 Matrix Mode
CPX shows LOGO and then automatically enters Matrix Mode. The LCD screen displays the current
status.
Q16pro Gen2 User Manual
28