Table of Contents
Advertisement
Stream
H.265 Module supports to preview image.
Image Quality: smooth (by default), normal, HI-Q
Users can do refer to steps below:
1. Turn on Layer Preview, Input Preview, Scene Preview
or Expand Preview according to the actual need.
2. Turn on H.265 and users can preview the image. As
shown in the right figure, the interface shows that Layer
Preview, Input Preview, Scene Preview are enabled.
Note: H.265 is the master switch. If the user turns on H.264 first, it cannot be set successfully.
Layer Movement
Moving the mouse to drag the layer.
Layer Remove
Click the cross on the top right of the layer to remove
the layer if needed.
Q16pro Gen2
User Manual
61
Advertisement
Table of Contents
