Table of Contents
Advertisement
Click [Fan Control] to do settings of fan speed. Two modes are optional. The default mode is
Auto-Adjustment Mode. If you need to manually control the fan speed, please turn off the
Auto-Adjustment Mode to adjust the fan speed.
If the temperature of the device exceeds 70℃, a prompt will pop up on the LCD screen as shown
above.
Factory Reset
Click [Factory Reset] to enter the interface. In this interface, you can choose to Reset IP or Reset
EDID. You can also choose to Reset both EDID and IP if necessary.
After clicking [Confirm], the LCD screen will prompt "Resetting, please do not power off" during
the process; After reset is completed, the screen will display "Reset completed, please restart
Q16pro Gen2
User Manual
13
Advertisement
Table of Contents
