Table of Contents
Advertisement
Users
can
choose
Standard
Customize Resolution by typing in Width, Height
and Refresh Rate. Then click Set to save above
operations.
Genlock Set
Status: Enable or disable the Genlock function by
sliding the Genlock switch. If select"ON", the output
resolution will be same with the resolution that
selected.
Input Format: If there is Genlock input signal , the
format will be shown.
Output Format: 1920x1080@60.
Input Source: HDMI or BNC can be selected in"Input
Source"by sliding the switch.
Brightness Adjustment
Brightness: 0~100 adjustable. Default to be 50.
Apply Board: to set brightness of selected output
module to be the same.
Apply Global: to set brightness of all output modules
to be the same.
Output Protocol
Board: Current Board/All Board.
Type: DVI/HDMI.
Bits: Fixed value 8 bits if type is DVI; 8 bits/10 bits/12
bits optional if type is HDMI.
Q16pro Gen2
Resolution
or
Standard Resolution
User Manual
Customize Resolution
50
Advertisement
Table of Contents
