RGBlink Q16pro Gen2 User Manual page 37

3.1.5.2 Mode
Press MENU to enter main menu interface, choose [ Mode ] to enter the following interface.
In this interface, user can choose Matrix Mode, Switch Mode or Scene Mode to meet various
requirements.
Matrix Mode: Select one input signal from [IN 1-16] and then select one ( or above) output signal
from [OUT 1-16]. For example, if you need to switch input signal 2 to output signal 5, please do as
follows: [ Matrix Mode] -[IN 2] - [OUT 5].
Switch Mode: Select multiple output ports that need to display the same signal from [OUT 1-16],
and then select the input signal from [IN 1-16].
Scene Mode: [IN 1-16] indicate Page 1-16 and [OUT 1-16] indicate Scene 1-16. Press [LOAD]
button to enter Page 1 by default.For example, If you need to switch Scene 1 on Page 2, please do
as follows: [LOAD]-[IN 2]-[OUT 1].
3.1.5.3 OSD
Press MENU to enter main menu interface, choose [ OSD ] to enter the sub-menu.
Q16pro Gen2 User Manual
36