Table of Contents
Advertisement
Example: If you want to add [OUT 9], [OUT 12] and [OUT 15] to the synchronous output group,
move [OUT 1] out of the group, output [IN 1] to the group firstly and later output [IN 5] to the
group ,you can take the following steps.
Step 1: Press [OUT 9], [OUT 12] and [OUT 15] to add output signal 9, 12 and 15 to the
synchronous output group. Lights will be on after [OUT 9], [OUT 12] and [OUT 15] have been
pressed.
Step 2: Press [OUT 1] to remove output signal 1 from the group. Light of [OUT 1] will turn OFF.
(Notice: Suppose that [OUT 1], [OUT 3] and [OUT 5] displayed the signal 8 at first, and [OUT 1]
continues to display the signal 8 after been removed from the output group. )
Step 3: Press [IN 1] to output input signal 1 to the set synchronous output group. Light of [IN 1]
will be ON.
Q16pro Gen2
User Manual
32
Advertisement
Table of Contents
