Table of Contents
Advertisement
Dante
Q16pro Gen2 supports Quad Input & Quad
Output Analog Audio Module, which should be
inserted
into
the
slots
input&output module. The user can select audio
mode and configure audio channel here.
Output Port: current port.
Basic Parameters
Select Mode：4x4 or 16x16.
DANTE 1.1~DANTE 1.4: Configure audio channel.
Click Set to save above settings. Then, the user
can perform more operations on audio in Layer
Management.
Input Setting
Click any input port, the board where the port
locates is selected. Users can do settings to the
port now.
A red rectangle flashes around the chosen port
when it is clicked.
User can set <EDID>. If 4K module is installed, the
< 4K > setting interface will appear.
4K
Input Module：Position of current chosen port
Basic Parameters
Input Source: Choose certain port on the 4K module.
Q16pro Gen2
supporting
both
User Manual
52
Advertisement
Table of Contents
