Use Main Menu - RGBlink Q16pro Gen2 User Manual

Example 2：The initial status is that the Scene 5 has been loaded. If you want to switch to scene 1,
the following steps can be followed.
Step 1: Press [LOAD] to enter non-saved scene mode, and the light will be on.
Step 2: Press [OUT 1] to switch to Scene 1.
Note: If the user needs to save a new scene, press [TAKE] button after input-output relationship has been set .
Example: If you want to save the preset to Scene 2, press [OUT 2] button and then the [TAKE] button to complete
the operation.

3.1.5 Use Main Menu

Six parts are built in Main Menu, which include [ Search ], [ Mode ], [ OSD ], [ Language ], [ Reset]
and [ Admin ].
Under menu operation, [ TAKE ], [ SAVE], [ LOAD] and [ ALL ] are used as Direction Keys, which
indicate Up, Down, Left and Right respectively; and [ Enter ] is used as Confirm Key.
Q16pro Gen2 User Manual
34