Table of Contents
Advertisement
Click Return to back to <System Setting>
Communication Setting：The default is <search>, if
it is <direct>, users need to type the corresponding
IP address.
Serial Port：Search only those connect via serial port.
Ethernet Connection：search only those connect via
Ethernet.
Both Are Chosen: Click both, both connections
change synchronously.
Display Setting: turn on Expanding Mode if there is
an extension screen.
Novice Guide: check novice guide for quicker
operation of XPOSE software.
Auto Connect: turn on auto connection switch and
the interface will pop up a prompt to remind the user
whether to restore the previous interface.
Authorization Setting
Click
to open up the authorization entry.
Authorization Setting is used to add and edit the
user name and password for authorized users, as
well as the permissions that users can operate.
Authorization Status defaults to OFF, please Turn
On Status for operation.
For operating device for the first time, or device
upgrade, or factory reset, XPOSE defaults to log in as
Administrator with name defaults to Admin, and
PWD defaults to admin.
Devices.
Q16pro Gen2
is displayed in Chosen
User Manual
46
Advertisement
Table of Contents
